Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
3214 A 70 125 39.7 88.4 80 5600 4500
3214 A-2Z 70 125 39.7 88.4 80 5600 4500
3314 A 70 150 63.5 163 125 5000 4300
3215 A 75 130 41.3 95.6 88 5300 4500
3315 A 75 160 68.3 176 140 4500 4000
3216 A 80 140 44.4 106 95 5000 4300
3216 A-2Z 80 140 44.4 106 95 5000 4300
3316 A 80 170 68.3 193 156 4300 3800
3217 A 85 150 49.2 124 110 4500 3800
3217 A/C3 85 150 49.2 124 110 4500 3800
3317 A 85 180 73 208 176 4000 3600
3218 A 90 160 52.4 130 120 4300 3600
3318 A 90 190 73 208 180 3800 3400
3219 A 95 170 55.6 159 146 4000 3400
3319 A 95 200 77.8 240 216 3600 3200
3220 A 100 180 60.3 178 166 3800 3200
3320 A 100 215 82.6 255 255 3400 2800
3222 A 110 200 69.8 212 212 3400 2800
3322 A 110 240 92.1 291 305 3000 2600
305256 D 120 190 66 182 232 3400 3600