Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7308 BECBM 40 90 23 50 32.5 10000 13000
7308 BECBP 40 90 23 50 32.5 9500 10000
7308 BECBY 40 90 23 50 32.5 10000 10000
7308 BEGAM 40 90 23 50 32.5 10000 13000
7308 BEGAP 40 90 23 50 32.5 9500 10000
7308 BEGAPH 40 90 23 50 32.5 9500 10000
7308 BEGBM 40 90 23 50 32.5 10000 13000
7308 BEGBP 40 90 23 50 32.5 9500 10000
7308 BEGBY 40 90 23 50 32.5 10000 10000
7308 BEP 40 90 23 46.2 30.5 9500 9000
7408 BCBM 40 110 27 70.2 45 8000 11000
7408 BGBM 40 110 27 70.2 45 8000 11000
7408 BM 40 110 27 70.2 45 8000 11000
7209 ACCBM 45 85 19 44 32 10000 15000
7209 BE-2RZP 45 85 19 35.8 26 9500 7500
7209 BECBJ 45 85 19 38 28.5 9500 10000
7209 BECBM 45 85 19 38 28.5 10000 13000
7209 BECBP 45 85 19 38 28.5 9500 10000
7209 BECBY 45 85 19 38 28.5 10000 10000
7209 BEGAP 45 85 19 38 28.5 9500 10000