Thrust Ball Bearings

Thrust ball bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.

In addition to the bearings presented in this section, AGA supplies thrust ball bearings for special application requirements.


PDF
Down		 Inquiry Bearing
Model		 Principal Dimensions Basic Load
Ratings		 Speed
Ratings		 Related Parts
d D H H1 Cr C0r Reference
Speed		 Limiting
Speed		 Housing
Washer
[mm] [mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
53204 20 40 14.7 17 21.2 37.5 5600 8000 U 204
51105 25 42 11 —— 18.2 39 6300 9000 ——
51205 25 47 15 —— 26.5 50 5300 7500 ——
51305 25 52 18 —— 34.5 60 4500 6300 ——
51405 25 60 24 —— 42.3 67 3600 5000 ——
53205 25 47 16.7 19 26.5 50 5000 7000 U 205
51106 30 47 11 —— 19 43 6000 8500 ——
51206 30 52 16 —— 25.1 51 4800 6700 ——
51306 30 60 21 —— 35.8 65.5 3800 5300 ——
51406 30 70 28 —— 70.2 122 3000 4300 ——
53206 30 52 17.8 20 25.1 51 4500 6300 U 206
53306 30 60 22.6 25 35.8 65.5 3800 5300 U 306
51107 35 52 12 —— 19.9 51 5600 7500 ——
51207 35 62 18 —— 35.1 73.5 4000 5600 ——
51307 35 68 24 —— 49.4 96.5 3400 4800 ——
51407 35 80 32 —— 76.1 137 2600 3600 ——
53207 35 62 19.9 22 35.1 73.5 4000 5600 U 207
53307 35 68 25.6 28 49.4 96.5 3200 4500 U 307
51108 40 60 13 —— 25.5 63 5000 7000 ——
51208 40 68 19 —— 44.2 96.5 3800 5300 ——