• Deep Groove Ball Bearings

    Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

PDF
Down		 Inquiry Model Inner Diameter Outer Diameter Width Basic Dynamic Load Rating Limiting Speed
[mm] [mm] [mm] (kN) [r/min]
6214 M 70 125 24 60.5 10000
6214 M/C4VL0241 70 125 24 63.7 10000
6214/C4 70 125 24 63.7 7000
6214/HC5C3 70 125 24 60.5 8500
6215 M/HC5C4HS0 75 130 25 66.3 9500
6215 NR/C3 75 130 25 68.9 6700
6215-2Z/C4 75 130 25 68.9 5300
6215-2Z/VA201 75 130 25 —— 40
6215/HC5C3 75 130 25 66.3 8000
6215/VA201 75 130 25 —— 40
6216 2RSJEM 80 140 26 72.8 3000
6216 JEM 80 140 26 72.8 6000
6216-2Z/C3 80 140 26 72.8 4800
6216-2Z/C4 80 140 26 72.8 4800
6216-RS1 80 140 26 72.8 3000
6216/C3 80 140 26 72.8 6000
6217 M/HC5C4HS0 85 150 28 83.2 8000
6217-2Z/C3 85 150 28 87.1 4500
6217/HC5C3 85 150 28 83.2 6700
6218 2ZJEM 90 160 30 101 4300