• Deep Groove Ball Bearings

    Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

PDF
Down		 Inquiry Model Inner Diameter Outer Diameter Width Basic Dynamic Load Rating Limiting Speed
[mm] [mm] [mm] (kN) [r/min]
61911-2RS1 55 80 13 16.5 5000
61912/C3 60 85 13 16.5 10000
61916-2RS1 80 110 16 25.1 3400
61916/C3 80 110 16 25.1 7500
61922 MA/C3 110 150 20 43.6 7500
61928 MA 140 190 24 66.3 5600
61932 MA 160 220 28 92.3 5000
61936 MA 180 250 33 119 4300
61968 MA/C3 340 460 56 281 2200
61988 MA 440 600 74 410 1600
62/22 22 50 14 14 19000
62/28 28 58 16 16.8 16000
6200 2RSJEM 10 30 9 5.4 17000
6200 JEM 10 30 9 5.4 36000
6200 ZJEM 10 30 9 5.4 36000
6200-2RSH/C3 10 30 9 5.4 17000
6200-2RSH/C4 —— —— —— —— ——
6200-2RSH/LT 10 30 9 5.4 17000
6200-2RSH/VA947 10 30 9 5.4 17000
6200-2RSHN 10 30 9 5.4 17000