Insert Bearings (Y-bearings)

Insert bearings (Y-bearings) are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.


PDF
Down		 Inquiry Model Principal Dimensions Basic Load Ratings Limiting Speed
Dynamic Static
d [mm] D/D1 [mm] B1 [mm] B [mm] C/C1 [mm] C (kN) C0 (kN) [r/min]
YAR 214-208-2F 63.5 125 69.9 —— 28 62.4 45 2800
UC 313 65 140 75 —— 38 92.3 60 2650
UCX13 65 125 74.6 —— 29 62.4 44 2250
YAR 213-2F 65 120 68.3 —— 27 57.2 40 3000
YAR 213-2RF 65 120 68.3 —— 27 57.2 40 1600
YAR 213-211-2F 68.263 120 68.3 —— 27 57.2 40 3000
YAR 215-212-2F 69.85 130 73.3 —— 29 66.3 49 2600
UC 314 70 150 78 —— 39 104 68 2500
UCX14 70 130 77.8 —— 30 66.3 49 2100
YAR 214-2F 70 125 69.9 —— 28 62.4 45 2800
YAR 215-215-2F 74.613 130 73.3 —— 29 66.3 49 2600
YAR 216-215-2F 74.613 140 77.8 —— 30 72.8 53 2400
YEL 215-215-2F 74.613 130 74.6 92.1 29 66.3 49 2600
UC 315 75 160 82 —— 43 114 76.5 2300
UCX15 75 140 82.6 —— 32 71.5 54 1900
YAR 215-2F 75 130 73.3 —— 29 66.3 49 2600
UC 315-48 76.2 160 82 —— 43 114 76.5 2300
YAR 216-300-2F 76.2 140 77.8 —— 30 72.8 53 2400
UC 316 80 170 86 —— 44 124 86.5 2150
UCX16 80 150 85.7 —— 34 83.2 64 1800