Thrust Ball Bearings

51292 F Thrust Ball Bearings

Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Separable design facilitates mounting/dismounting and maintenance inspections
Interchangeable components
Ground bore of shaft washers enable interference fit

PDF Download Online Inquiry

51292 F

Dimensions

d	460 mm	Bore diameter
D	620 mm	Outside diameter
H	130 mm	Height
d₁	≈ 615 mm	Outside diameter shaft washer
D₁	≈ 465 mm	Inner diameter housing washer
r_1,2	min. 5 mm	Chamfer dimension washer

Abutment dimensions

d_a	min. 557 mm	Abutment diameter shaft
D_a	max. 523 mm	Abutment diameter housing
r_a	max. 4 mm	Fillet radius

Calculation data

Basic dynamic load rating	C	923 kN
Basic static load rating	C₀	5 850 kN
Fatigue load limit	P_u	95 kN
Reference speed		430 r/min
Limiting speed		600 r/min
Minimum load factor	A	180

Tolerances and clearances

General bearing specifications

Tolerances: table 1

Bearing interfaces

Seat tolerances for standard conditions
Tolerances and resultant fit

51196 F

51192 F

Ball Bearing

Roller bearing

Thin-walled bearing

Corporate information

AGA China Information

Select Region/Language

Call us: