Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7412 BGAM 60 150 35 119 86.5 5600 7500
7412 BGBM 60 150 35 119 86.5 5600 7500
7412 BM 60 150 35 119 86.5 5600 7500
7213 ACCBM 65 120 23 81.5 65.5 7000 11000
7213 BECBJ 65 120 23 69.5 57 6700 6700
7213 BECBM 65 120 23 69.5 57 6700 9000
7213 BECBP 65 120 23 69.5 57 6700 6700
7213 BECBY 65 120 23 69.5 57 6700 6700
7213 BEGAF 65 120 23 66.3 54 6700 6300
7213 BEGAP 65 120 23 69.5 57 6700 6700
7213 BEP 65 120 23 66.3 54 6700 6300
7313 ACCBM 65 140 33 132 96.5 6300 9500
7313 BECBF 65 140 33 108 80 6000 5600
7313 BECBJ 65 140 33 116 86.5 6000 6300
7313 BECBM 65 140 33 116 86.5 6300 8000
7313 BECBP 65 140 33 116 86.5 6000 6300
7313 BECBY 65 140 33 116 86.5 6000 6300
7313 BECCM 65 140 33 116 86.5 6300 8000
7313 BEGAF 65 140 33 108 80 6000 5600
7313 BEGAM 65 140 33 116 86.5 6300 8000