Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7313 BEGAP 65 140 33 116 86.5 6000 6300
7313 BEGBM 65 140 33 116 86.5 6300 8000
7313 BEGBP 65 140 33 116 86.5 6000 6300
7313 BEGBY 65 140 33 116 86.5 6000 6300
7313 BEP 65 140 33 108 80 6000 5600
7413 BCBM 65 160 37 130 96.5 5300 7000
7413 BGBM 65 160 37 130 96.5 5300 5300
7214 ACCBM 70 125 24 83 68 6700 10000
7214 BECBJ 70 125 24 72 60 6300 6300
7214 BECBM 70 125 24 72 60 6300 8500
7214 BECBP 70 125 24 72 60 6300 6300
7214 BECBPH 70 125 24 72 60 6300 6300
7214 BECBY 70 125 24 72 60 6300 6300
7214 BEGAF 70 125 24 67.6 56 6300 6000
7214 BEGAM 70 125 24 72 60 6300 8500
7214 BEGAP 70 125 24 72 60 6300 6300
7214 BEP 70 125 24 67.6 56 6300 6000
7314 ACCBM 70 150 35 143 110 6000 8500
7314 BECAP 70 150 35 127 98 5600 5600
7314 BECBJ 70 150 35 127 98 5600 5600