Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7216 BEGAPH 80 140 26 85 75 5600 5600
7216 BEP 80 140 26 80.6 69.5 5600 5300
7316 BECBJ 80 170 39 143 118 5000 5000
7316 BECBM 80 170 39 143 118 5000 6700
7316 BECBP 80 170 39 143 118 5000 5000
7316 BECBY 80 170 39 143 118 5000 5000
7316 BECCM 80 170 39 143 118 5000 6700
7316 BEGAM 80 170 39 143 118 5000 6700
7316 BEGAP 80 170 39 143 118 5000 5000
7316 BEGAY 80 170 39 143 118 5000 5000
7316 BEGBY 80 170 39 143 118 5000 5000
7316 BEP 80 170 39 135 110 5000 4500
7416 CBM 80 200 48 182 156 4300 4300
7416 GAM 80 200 48 182 156 4000 4300
7416 M 80 200 48 182 156 4000 4300
7217 BECBJ 85 150 28 102 90 5300 5300
7217 BECBM 85 150 28 102 90 5300 7000
7217 BECBP 85 150 28 102 90 5300 5300
7217 BECBY 85 150 28 102 90 5300 5300
7217 BEGAF 85 150 28 95.6 83 5300 5000