Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7218 BEGAF 90 160 30 108 96.5 5000 4500
7218 BEGAM 90 160 30 108 96.5 5000 5600
7218 BEGAP 90 160 30 116 104 5000 5000
7218 BEGAY 90 160 30 116 104 5000 5000
7218 BEP 90 160 30 108 96.5 5000 4500
7318 BECBJ 90 190 43 166 146 4300 4500
7318 BECBM 90 190 43 166 146 4500 6000
7318 BECBP 90 190 43 166 146 4300 4500
7318 BECBY 90 190 43 166 146 4300 4500
7318 BEGAM 90 190 43 166 146 4500 6000
7318 BEGAP 90 190 43 166 146 4300 4500
7318 BEGAPH 90 190 43 166 146 4300 4500
7318 BEGAY 90 190 43 166 146 4300 4500
7318 BEP 90 190 43 156 134 4300 4000
7418 CBM 90 225 54 212 193 3800 3800
7418 GAM 90 225 54 212 193 3600 3800
7219 BECBM 95 170 32 129 118 4800 6300
7219 BECBP 95 170 32 129 118 4500 4800
7219 BECBY 95 170 32 129 118 4500 4800
7219 BEGAM 95 170 32 129 118 4800 6300