Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7320 BECBP 100 215 47 216 208 3800 4000
7320 BECBY 100 215 47 216 208 3800 4000
7320 BECCM 100 215 47 216 208 4000 5000
7320 BEGAF 100 215 47 203 190 3800 3600
7320 BEGAM 100 215 47 216 208 4000 5000
7320 BEGAP 100 215 47 216 208 3800 4000
7320 BEM 100 215 47 203 190 4000 4500
7320 BEP 100 215 47 203 190 3800 3600
7420 CBM 100 265 60 276 275 3200 3200
7221 BECBM 105 190 36 156 150 4300 5600
7221 BECBP 105 190 36 156 150 4000 4300
7221 BEP 105 190 36 148 137 4000 3800
7321 BECBM 105 225 49 216 208 3800 5000
7321 BECBP 105 225 49 216 208 3600 3800
7321 BEGAM 105 225 49 216 208 3800 5000
7321 BEP 105 225 49 203 193 3600 3400
7222 BECBM 110 200 38 163 156 4000 5300
7222 BECBP 110 200 38 163 156 4000 4000
7222 BECBY 110 200 38 163 156 4000 4000
7222 BECCM 110 200 38 163 156 4000 5300