Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
71876 ACGAMB 380 480 46 291 500 1300 1400
71976 ACGAMB 380 520 65 410 735 1300 1300
307238 400 600 90 605 1180 950 1200
7080 AM 400 600 90 605 1180 1100 1100
7080 BM 400 600 90 540 1060 1000 1000
71980 AM 400 540 65 403 735 1200 1200
7280 BM 400 720 103 728 1500 900 900
7084 AM 420 620 90 605 1180 1100 1100
7084 BGM 420 620 90 540 1060 1000 1000
71984 AM 420 560 65 410 765 1200 null
71984 BM 420 560 65 364 670 1100 1100
71988 ACMB 440 600 74 507 1040 1100 1100
70892 AM 460 580 37 265 560 1100 1100
7092 AM 460 680 100 689 1460 950 950
7092 BM 460 680 100 618 1290 900 900
71892 AGMB 460 580 56 371 765 1100 1100
70/500 AM 500 720 100 715 1600 900 900
70/500 BM 500 720 100 637 1400 800 800
708/500 AMB 500 620 37 276 620 1000 1000
718/500 AGMB 500 620 56 390 850 1000 1000