Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7036 BGM 180 280 46 195 240 2600 2600
7236 BCAM 180 320 52 291 375 2400 2800
7236 BCBM 180 320 52 291 375 2400 2800
7336 BCBM 180 380 75 410 540 2200 2400
7038 BGM 190 290 46 199 255 2400 2400
7238 BCBM 190 340 55 307 405 2200 2600
7338 BCBM 190 400 78 442 600 2000 2400
7040 BGM 200 310 51 225 290 2200 2200
7240 BCBM 200 360 58 325 430 2200 2400
7340 BCBM 200 420 80 462 655 1900 2200
7044 BGM 220 340 56 255 355 2000 2000
7244 BCBM 220 400 65 390 560 1900 2200
7344 BCBM 220 460 88 494 720 1600 1600
7048 BGM 240 360 56 260 375 1900 1900
7248 BCBM 240 440 72 364 540 1600 1600
7348 BCBM 240 500 95 527 800 1400 1400
7052 BGM 260 400 65 332 510 1700 1700
7252 BM 260 480 80 507 780 1400 1400
7056 BGM 280 420 65 338 540 1600 1600
7256 BM 280 500 80 507 830 1400 1400