Angular Contact Ball Bearings

Angular Contact Ball Bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

PDF
Down		 Inquiry Model Principal Dimensions Basic Load Rating Speed (r/min)
Inner Diameter Outer Diameter Width Cr Cor Reference speed Limiting speed
[mm] [mm] [mm] (kN) (kN) [r/min] [r/min]
7060 AGM 300 460 74 423 695 1500 1500
7060 BGM 300 460 74 377 630 1400 1400
7260 BCBM 300 540 85 553 930 1300 1300
7064 BGM 320 480 74 390 670 1300 1300
71964 AC 320 440 56 351 585 1500 1600
7264 BCBM 320 580 92 572 1020 1200 1200
7068 BGM 340 520 82 449 815 1200 1200
71968 ACMB 340 460 56 351 610 1500 1500
7072 AGM 360 540 82 520 950 1300 1300
7072 AM 360 540 82 520 950 1300 1300
7072 BGM 360 540 82 462 850 1200 1200
71872 ACMB 360 440 38 234 425 1500 1500
71972 ACMB 360 480 56 351 630 1400 1500
71972 AMB 360 480 56 338 610 1400 1500
71972 BM 360 480 56 302 550 1300 1300
466953 380 520 65 345 610 1200 1200
7076 AM 380 560 82 507 950 1200 1200
7076 BGM 380 560 82 462 850 1100 1100
7076 BM 380 560 82 462 850 1100 1100
70876 AMB 380 480 31 199 355 1300 1400